LED361 Starway Warning super LED lighthead / Police LED Dash deck light / Emergency grill led lighthead

1. Summary

This Starway Warning LED Grill lighthead is made of high power high brightness LED.It use microcomputer programming chip, and constant voltage circuit design, It has high brightness,low power loss, long life and so on the merits. It has a lot of kinds of flash pattern offer to choose and power off memory function. It is suitable to install in automobile vehicle.

2.Features

1). Work voltage:DC12V / 24V

2). Life  Span: 100,000   

3). G-3 LEDs with 4 bulbs

4). 18 flash patters to pick up and can flash two lightheads together for  synchronization 

5). Waterproof and shockproof

6). Perfect  for interior and outer applications . 

3. Specifiation

4. Mounting

1). Position the unit in its proposed mounting location. Draw a pencil line onto the mounting surface along the top and bottom of the extrusion and a "centerline" centered between the two.

2). Two 1/4" holes are required to mount this unit. These holes may be located anywhere along the holes as far apart as possible. Mark the hole location onto the mounting surface.

3). Using a 1/4" drill bit, drill a hole in each of the areas scribed in the previous step.

4). Slide the 2 carriage bolts (installed in the rear of the bar) insert them into the mounting holes.

5). Secure the unit by threading the flat washer and elastic stop nut onto each bolt and tightening them firmly.

5.Wiring

See illustration diagram for wiring information

WARNING! All customer-supplied wires that connect to the positive terminal of the battery must be sized to supply at least 125% of the maximum operating current and at the battery to carry the load. DO NOT USE CIRCUIT BREAKER SWITH THIS PRODUCT!

6.Operation

Note:

    The Starway warning LED Grill lighthead (LED361) has no work, please check the main fuse.

Workshop:


Applications: 
Police, Fire, The Automotive, Police, Fire, Motorcycle, Construction,Emergency Vehicle and School Bus Industries