LED Police Vehicle Light Bars from China manufacturer - Ningbo Starway Security Equipment Co., Ltd.

Payment Terms:	T/T,WU
Place of Origin:	Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: LTF-8M905

Production Capacity: 1000sets/month

Delivery Date: one week after payment

Place of Origin: China (Mainland)

Light Sources: LEDS

Base material: Aluminum alloy

Total consume current: 6.3A(max)

Total power: 75.6W

Means of Transport: Ocean,Air

Packing: Neutral Packaging

Brand Name: Starway

LED Color: Red/Yellow/Blue/White

Dome material: PC

Type: Traffic Signal

Environment: -40 ℃~ +50 ℃.

Voltage:DC12 ;The max. lightened bound: > 800LX;Currant: <6.3A;Total power: 75.6W;Material:Aluminum and PC material;Ideal for fire trucks, tow truck

LTF-8M905 LED lightbar for Police ,Fire,Emergency, Ambulance and Special Vehicles

1. Summary

This product adopts double-layer aluminum alloy boards structure, which has distinct outline stronger percussion-resistant capability, and is not easy to lose color and get aged. Moreover, the light bar has good sealing and waterproof. A lot of LED lights are distributed shapely and use high power LED lights let it give out strong flash light from each direction. And it has advantage with high brightness and low power waste. It has 12 kinds flash pattern and tree modes direction lights. It can be installed on all kinds of special vehicles. Even in extremely complicated, circumstances, it can transmit emergency signal correctly.

2. Specifiation:

Work voltage	DC12V
The max. lightened bound	> 800LX
Environment	-40 ℃~ +50 ℃
Waste currant	6.3A(max)
Light type	LEDS
Total power	75.6W
Dome	PC
Base	Aluminum alloy
The length of the light bar	1.04m

3.Installation of the warning light bar

a)Put light bar on the vehicle's roof, base on the vehicle's size, adjusting the frame to fit it, And Then let the catches button the rainwater line on both side of the vehicle and screwing the nut by wrench. (see. Figure 1 below)

b)After installed, connect the wires to the controller, left to right is output 1, output 2, output 3, output 4, output 5, output 6, output 7, output 8, ground, +12V. Connect the output1-8 to the lightbar's eight groups wires (negative), connect the ground to the battery's negative, connect the +12V both to the battery's positive and lightbar's +12V. ( see: figure 2 )

c)Turn on the controller power switch, then press the pattern or direction button to work the light bar.